Standard products

You are here: Home - Product List Product List
Welded Wire Mesh >> Product Standards


Wire Diameter Tolerance:

±0.02mm (for wire diameter below 1.0mm)

±0.05mm (for wire diameter range from 1.01 to 3.0mm)

±0.10mm (for wire diameter range from 3.01 to 5.0mm)

±0.12mm (for wire diameter above 5.01mm)


Mesh Size Tolerance:   

 ±0.01 inch (for mesh size below 1/2 inch)

±0.02 inch (for mesh size above 1/2 inch to 2 inch)

 ±0.05 inch (for mesh size above 2 inch to 5 inch)

 ±0.08 inch(for mesh size above 5 inch)


Width Tolerance:

 ±5.0mm for width below 1200mm

 ±10.0mm for width above 1200mm


Length Tolerance:

-0.10m for lenght below 30m


Panel Size Tolerance:

-Panle size(mm) x 0.5%

Copyright @ 2012- 2015 Anping Qinghe Metal Mesh Co., Ltd All Rights Reserved  

Sitemap - Contact